01
Draw
Outline, neck, headstock and cavities are Bézier curves. Move a point and the dimensions are recomputed.
Lutherie Design Studio
From first sketch to G-code, in one piece of software.
And a solver that places every fret to a tenth of a millimetre, guarantees the scale length and computes the compensation. It warns you as soon as a dimension makes the instrument unplayable.
Twelve original models, fully editable, inspired by the great classics. A neck-through model is coming soon.
25.5" scale (648 mm) · 22 frets · 2 pickups
Coming soon1 of 13
The whole chain
Start from one of our existing models, carve it, choose your hardware, then machine it.
01
Outline, neck, headstock and cavities are Bézier curves. Move a point and the dimensions are recomputed.
02
Carve top, bevel, fillet and volute, on the top as well as the back. The bevel goes down to 30 mm.
03
You choose the bridge, the pickups and the electronics in the design brief. The cavities follow your choice.
04
Roughing, finishing, pockets, drilling, and the profile last. Each step comes out as its own G-code file.
The solver
Rhino, Fusion or SolidWorks will draw any shape. They don’t know where a fret falls, where the bridge goes, or where a pickup should sit.
LuthierXpert does. Every fret is placed to a tenth of a millimetre. The scale length is guaranteed: the bridge sets itself at the right distance from the nut, compensation included. And the pickups land on the strings’ harmonic nodes. Everything is recomputed on every edit, and the solver warns you as soon as a dimension no longer holds.
SOLVER · COHERENT Always shown at the bottom of the screen.
Who it is for
Open one of the twelve models and change it the way you like. The solver stops you if a dimension does not hold. No CNC? Print the plan at 1:1 and glue it onto the blank.
Run a model as a series and output your templates as DXF. The solid you export as STEP is the one the toolpaths are calculated from, and LuthierXpert turns them straight into G-code for your CNC.
The three editions
All three editions open the same software, with every model and the full 3D. They differ in what you can get out of it.
1:1 paper plans
The dimensioned plan, to print or to save as PDF.
DXF · STL · STEP
Outlines as DXF, the solid as STL or STEP, at 1:1.
G-code .nc
One file per machining step, from roughing to profile.
Lifetime licence, one seat, transferable free of charge.